Status: In my den
This window was truly a labor of love. After 10 months in my gazebo it finally got the attention it deserved but it took a very long time to remove the panes of glass, scrape away old putty and sand the woodwork. On a positive note, the multiple layers of paint that had been applied over the years offered up a rich layering effect when it was heavily distressed.
Having recently paid $$$s for a couple of professional framing jobs this transformation was well worth the effort!
Having recently paid $$$s for a couple of professional framing jobs this transformation was well worth the effort!
 |
| The first job was to painstakingly remove the hardware, metal stripping and all 6 panes of glass. Only 4 of the panes survived! |
 |
| With the wood frame stripped of all its accessories it was time for the first good scrub with a weak soap solution to remove months of build up. |
 |
| Starting with 80 grit and finishing with 220 grit sandpaper I distressed the clean frame. I wanted to keep a rustic look to the piece and didn't intend to apply any paint so I worked to expose all the different layers of paint and some of the wood. Once I had the look I was after I gave the piece a second, final clean before sealing it with a coat of Rust-Oleum Satin Clear Enamel. |
 |
I
bought a multi-pack of matte boards with 8 x 10 openings and cut them
to fit the pane openings. Two panes of glass from Ace Hardware and 6
pieces of hardboard cut by my husband rounded out my supply list for
this project. I was ready to put it all together.
|
 |
In
each opening I secured glass, photo, matte board and hardboard using
glazier points. A couple of d-ring hangers were added to the frame for hanging.
|
 |
| ❤️❤️❤️❤️❤️ |
No comments:
Post a Comment